AA2913
Hello,
I have created a certificate template with all the properties I wanted. Except for one, which I cannot figure out.
Basically in the Subject Name tab it needs to select : "Build From This Active Directory Information" and then in the drop down for Subject Name Format it needs to say "Fully Distinguished Name"
Anyone knows the properties and values that need to be modified?
Any help greatly appreciated!
Hello,
I have a situation that seems a bit unique and all of the information I have found online doesn't quite match up to my scenario.
I have two DC's server.domain1.local andserver.domain2.local when both domains are functioning normally by themselves, but I am trying to create a trust between the two. It would seem since they are both called server they cannot communicate even though they have different FQDN's.
When trying to create the trust I get an error "There are no logon servers available" I get the same error when trying to UNC from one to the other.
I did create the conditional forwarders before creating the trust, and want to point out that they are connected via VPN and as far as I can tell from the traffic log the VPN Firewall isn't blocking any traffic. I also turned off thewindows firewall temporarily as a test to see if that was the issue.
Any help would be appreciated.
Thanks
We have eight domain controllers being hosted by an external data center. The data center administrators requested a domain administrator account for their monitoring tools and to apply monthly Windows Update patches.
Question: Is there a set of permissions I can assign their account which will allow their monitoring and update tools to work without the full domain administrator assignment?
Thanks for your thoughts.
We have a 2012R2 Standard Application server that has a local account configured that is used for the day to day operations of the locally installed application. We have a domain account with the same name but with a different password that is used for a service that performs file copies and print jobs to network locations.
We are seeing that the domain account is getting locked out even when the domain account is not in use or the service is not running. From the event logs on the DC (2016) we can see that the domain account is getting locked out from the 2012R2 application server but it would appear that the local account is querying and locking out the domain account?
I have seen other articles in which this is referenced, can you advise if this is expected behavior and why would the local account be attempting to authenticate against the domain?
Hi, I want to know if GMSA created in parent domain can be used in child domain too or I have to create GMSA in child domain as well? GMSA is used as credential inAzure ATP Portal but we have 10 Domain Controllers in total (7 in parent domain/3 in child domain) in 2 domains - hence DCs in child domain should have right to retrieve password of GMSA in parent domain if feasible.
I assume answer is no but just want to confirm that. So far I have always used GMSA only on computers in domain it was originally created in?
Hello,
I have a forest with a domain that corresponds to my company.
This company is made up of several entities which have their own IT. I would like these computer scientists to be administrators of their OU.
That they can also be administrator of the domains of the servers of their OU, but only their OU and their children.
How to proceed?
Thanks a lot.
I am attempting my first active directory migration and having some problems Google can't help me resolve.
In order to utilize resources on the new domain ahead of the AD migration, the users have been manually created in the new AD. The idea of the migration is to:
I have two domains set up, users/groups/etc in both domains. I have created a trust and validated incoming and outgoing from each domain successfully. I made a test olddomain\User with Password123 and used ADMT to migrate the User to the new domain where newdomain\User with Password456 already existed. I then logged into a computer (still on old domain) with newdomain\username and Password456 successfully.
When I check AD it appears not one of the Security or Distribution groups were migrated along with the user. Some Googling led me to believe I should have migrated the groups first. I created a test Security group and placed this test User inot the group, then attempted to migrate the group and I'm met with"
"Could not verify auditing and TcpipClientSupport on domains. Will not be able to migrate Sid's. Access is denied"
I tried adding the olddomain\domainadmin to my Built-In Admin group on the new domain but the error persists.
This is where I'm stuck, I'm not sure what the point of migrating these groups is if I can't migrate SID's. Has anyone seen and overcome this error?
Installing, what I thought, was my first CA and during the CA setup I am asked if this is the Root CA or Subordinate CA. The weird thing is the wizard defaulted to Subordinate which confuses me. That makes me think it detected something that result in it thinking I already have a CA somewhere in my environment.
We might have had a CA a long time ago but the CA feature is not installed on any servers in my environment.
How can I very this?
Hello,
I'm receiving the following error when I try to install the WAP server "An error occurred when attempting to establish a trust relationship with the federation service. Error: The remote name could not be resolved" Does someone know how to fix this?
Thanks
Hey guys,
I am a domain admin and have a 2012R2 domain with Windows 10 clients(1909). We have a default domain GPO the specifies maximum password is 90 days, but my account also booted up being member of an AD group that has a FineGrainedPasswordPolicy that is applied and says maximum password age is 10675199. When I login to some web consoles, they are telling me that my account with expire in 12 days. Does anyone have any ideas what I might be missing?
I saw this with Windows 7, but was assuming it is fixed with Windows 10
Dave
Hi All,
AD users login process is taking too long if pc is connected external network(Like working from home)
IF i disable network it is working normarally
I tried below steps:
1. Uninstall Antivirus
2. Disjoin and rejoin domain
3. Removed from the all group policy except default group policy
4.There is no update installed on last month
5. There is no logon script
Events
=====================================================================================================
07/05/2020 14:04:28 : DNS Client Events : 8020
The system failed to register host (A or AAAA) resource records (RRs) for network adapter
with settings:
Adapter Name : {D2754B9D-86F5-42C1-BEDC-D3B8C4621821}
Host Name : EH-HO-RP-T470
Primary Domain Suffix : test.com
DNS server list :
192.168.0.1
Sent update to server : 97.74.8.59:53
IP Address(es) :
192.168.0.106
The reason the system could not register these RRs during the update request was because of a system problem. You can manually retry DNS registration of the network adapter and its settings by typing 'ipconfig /registerdns' at the command prompt. If problems
still persist, contact your DNS server or network systems administrator. See event details for specific error code information.
=====================================================================================================
07/05/2020 14:04:37 : WinLogon : User Log-on Notification for Customer Experience Improvement Program
======================================================================================================
07/05/2020 14:04:37 : Group Policy : Event ID : 1129
The processing of Group Policy failed because of lack of network connectivity to a domain controller. This may be a transient condition. A success message would be generated once the machine gets connected to the domain controller and Group Policy has successfully
processed. If you do not see a success message for several hours, then contact your administrator.
========================================================================================
07/05/2020 14:04:38 :Service Control Manager Event ID :7034
The Windows Biometric Service service terminated unexpectedly. It has done this 390 time(s).
==============================================================================================
07/05/2020 14:04:41 DistributedCOM :Event ID : 10016
The application-specific permission settings do not grant Local Activation permission for the COM Server application with CLSID
{6B3B8D23-FA8D-40B9-8DBD-B950333E2C52}
and APPID
{4839DDB7-58C2-48F5-8283-E1D1807D0D7D}
to the user NT AUTHORITY\LOCAL SERVICE SID (S-1-5-19) from address LocalHost (Using LRPC) running in the application container Unavailable SID (Unavailable). This security permission can be modified using the Component Services administrative tool.
Dear all,
We have a fine grain password policy implemented in our domain and it is working as expected.
We have observed that password change reminder balloon message stays for few seconds less that 5 sec and most of the it is getting ignored by users and creating problem.
With FGPP - is it possible to increase time of reminder message and can we put our Custom message.
in-short we are looking setting for Interactive Logon Prompt which will display password change notification.
-Atul
TheAtulA
Hello ,
We have DC but its SYSVOL folder and NETLOGON Folder not getting created.
As per Event log : 1753
I have checked as per support artical that required ports are Listening and all services are working.
I have also tried to reset that SYSVOL restiry from 0 to 1 but still folder is not replicated.
any help would be greate appicated.
The DFS Replication service encountered an error communicating with partner MYDC for replication group Domain System Volume.
Partner DNS address: MYDC.MYDCOMAIn.com
Optional data if available: Partner WINS Address: MYDC Partner IP Address: 20.3.200.103
The service will retry the connection periodically.
Additional Information: Error: 1753 (There are no more endpoints available from the endpoint mapper.) |
Thanks
Thanks , Prakash ,Please Note: My Posts are provided “AS IS” without warranty of any kind, either expressed or implied.
Do we need to explicitly configure in GPO in order to make sure below events registered in event viewer when ever respective action happened? or by default this settings will exist?
| Event ID | Description |
| 1100 | The event log service has shutdown |
| 1102 | The audit log was cleared |
| 4704 | A user right was assigned |
| 4705 | A user right was removed |
| 4715 | The audit policy (SACL) on an object was changed |
| 4719 | System audit policy was changed |
| 4728 | A member was added to a security-enabled global group |
| 4729 | A member was removed from a security-ena-bled global group |
| 4771 | Kerberos pre-authentication failed |
| 4772 | A Kerberos authentication ticket request failed |
| 4773 | A Kerberos service ticket request failed |
| 4780 | The ACL was set on accounts which are mem-bers of administrators groups |
Hello team
we are upgrading DFL to 2012 r2 from 2003
and if then we have roll back, the only option is Forest Recovery
Can you anyone advise which method is the best way
1) system state restore
2) baremetal backup restore
we have 4 DC in Parent Domain and 21 DC in child Domain
which will be more quick
and we have Manufacturing Unit and hence cannot without confirmation
any other suggestion is also welcome
Please advise
regards
Aamir Masthan
NA
Hello,
I have a DC a RODC (Both 2016). I configured my RODC DNS server to forward non AD queries (internet queries) to my ISP's DNS. My workstations have the RODC as primary dns server and the DC as secondary. The name resolution works fine but I realized that my domain controller also caches the requests of of my workstations. I checked that RODC have only my ISP's DNS in forwarders.
Now I wonder if DC and RODC synchronize the cache or my RODC do not actually forward the requests to my ISP but to the DC for some reason.
Thank you in advance.
I have one surviving vm DC in the environment that holds no fsmo roles. Its virtual.
My primary dc contains all fsmo roles (all servers are 2012) and its dying.
1. My plan is to transfer the fsmo roles to the virtual dc.
2. demote old server.
3. Skip the process of restoring other VM DC from backup and just create new DC's and have them talk to the new virtual pc holding the fsmo roeles.
4. Clear metadata of the decommissioned dc using ntdsutil.
5.Remove reference of removed server from DNS.
6. Delete Old server from Sites and Services.
repeat steps 4-7 for all the other VM DC's that were replaced by newly spun up dc's.
This should avoid painful lessons and keep me in the clearly with no surprises in 90 days correct?
Or is there a painful piece of information I'm overlooking?