Dear All,
Does anyone know how to record user actions (audit trails) and review them when required in the Microsoft Active Directory User and computers, version 6.2.9200.16384 (Windows server 2012)?
↧
Audit user actions
↧
Lost And Found Folder in Active Directory
We have a central management console which works with Active directory. We enumerate users/computers/groups etc and use it inside our console for applying the policy. Is it a good idea to consider "Lost And Found Folder" as a valid group just like others containers?
-- Vikram
↧
↧
Domain user does only appears in root ad directory
We are experiencing a very strange issue with the AD.
A user war created in the AD unser domain.de. The user shows properly in the in the AD snap in. and is located under domain/users.
However, when we want to assign user rights on the server (selecting the directory, properties etc) and selecting the domain in the search dialog box for the user - this user does not appear. This user only appears when we adjust the path to the root directory. But even then - when we then select this user and click ok - it does not appear in the user list.
In the user search dialog box the path is also correct domain.de/users (as all the other users).
The user is active and can sign in.
Would appreciate if anyone has an idea what could be wrong.
Thank you.
Uli
↧
server 2012 users and remote access-domain confusion
It was my understanding a user could not access any computers in a domain, unless that user was added to the domain controller.
In my test, I added a user to a vm server 2012, and can rdp onto that server, without being a user on the domain.
Normal??
↧
Event when local user or administrator login to domain machine
Hi
I have Win 2012R2 Domain,
My requirement is, i need to generate a log or event if anyone login with local user account or local administrator account on any domain machine.
thanks.
↧
↧
windows Server 2016
Hi,
we are using windows server 2016, and client machines are windows and mac.
windows machine successfully able to joint on domain. if we try to joint mac machines on domain getting error message 10001 and 5202 authentication error. i m put correct credential.
Please suggest.
Thanks,
Udaiyar
↧
User lockout continously , svchost.exe
Hello there!
How can i get info about an user lockout trough svchost?
One of my colleauge is continously locking out, and as far as i can get it is happening trough a service host.
Is there any way to get the source what or which lock him out?
Best regards,
Árpád
ps: sorry for bad english
↧
Can`t see users property from ForeignSecurityPrincipals OU
Hi,
in organization two domain with two way trust qwe.com and zxc.com. I add two new domain controllers to zxc.com and have a problem.
When I add user from qwe.com to group of zxc.com, and after that try to show members.
On new domain controller I cam see this
and on old domain controllers - ok
From new domain controller I can search users from qwe.com directory. In ForeignSecurityPrincipals OU (on new domain controller) I can see objects like SID and can not see there attributes. On the old controller, I can see the objects and their properties.
BPA error is:
Title:
Domain controller DC02.zxc.com must have "Access this Computer from the Network" granted to the appropriate security principals
Severity
Error
Problem:
Domain Controller DC02.zxc.com does not have user right "Access this computer from the network" granted to 'Builtin Administrators', 'Enterprise Domain Controllers' or 'Authenticated Users', or has the user right "Deny access to this computer
from the network" assigned to either of those groups or 'Everyone'.
Impact:
Replication operations initiated by other domain controllers in the domain or by administrators may fail. Users and computers may also experience failure to apply Group Policy objects.
Resolution
Verify that the domain controllers in the domain zxc.com have this user right granted to the appropriate security principals. Using Group Policy Management and Group Policy Results, verify that the winning Group Policy for the "Access this computer from
the network" user right grants that right to the 'Builtin Administrators', 'Enterprise Domain Controllers', and 'Authenticated Users' groups. Verify that the policy setting "Deny access to this computer from the network" does not have 'Everyone',
'Authenticated Users', 'Builtin Administrators' or 'Enterprise Domain Controllers' groups defined in it.
http://go.microsoft.com/fwlink/?LinkId=168844
I check policy, and all permission are default.
Title:
Domain controller DC02.zxc.com must have "Enable computer and user accounts to be trusted for delegation" granted to the Builtin Administrators security group
Problem:
Domain controller DC02.zxc.com must have the "Enable computer and user accounts to be trusted for delegation" user right granted to the Builtin Administrators security group if domain controller DC02.zxc.com is used as a replication partner during
a domain controller promotion.
Impact:
Installation of additional domain controllers (promoting replica domain controllers) in domain zxc.com may fail if they select domain controller DC02.zxc.com as a replication partner during the installation.
Resolution
Verify that the current domain controllers in domainzxc.com have the "Enable computer and users accounts to be trusted for delegation" user right granted to the Builtin Administrators group
http://go.microsoft.com/fwlink/?LinkId=168842
Title:SID filtering is not enabled for external trust qwe.com
Problem:
SID filtering is not enabled for external trust qwe.com established with domain zxc.com
Impact:
If authentication occurs across an external trust boundary (where the user and the computer hosting the resource are in different domains), a vulnerability exists because domain zxc.com (the trusting domain) does not verify that the trusted domain qwe.com is actually authoritative for all the SIDs in the authorization data (that is, the access token). It is possible for an attacker or rogue administrator to insert SIDs into the authorization data presented to this trusting domain zxc.com.
Resolution
Enable SID filtering for external trust qwe.com by using the netdom trust /quarantine:yes command. Enabling SID filtering may prevent users from accessing resources in your environment. Before enabling SID filtering for the trust, you should review the detailed resolution procedures for this BPA rule.
http://go.microsoft.com/fwlink/?LinkId=168864
↧
Deleting an object in AD DS
Hello,
I want to know what is the difference when I deleting an object with recycle bin enabled and when recycle bin is disable
I read that don't changes to tombstone but is-deleted attribute of that enables
What is the difference between them
Thanks for your help
↧
↧
GMSA and permissions
Greetings,
I have a scheduled script that creates user accounts and as part of that process it creates their home folder.
This script was run using an account that had administrative access to the server that holds the home folders, and because the administrators group has full access, it was able to create the home folder.
I decide to change the scheduled script to run under a GMSA. I put the GMSA in the same groups as the previous account and therefore should have administrative access to the home folder server.
However, when the script runs, it fails with Access Denied when creating the home folder.
Is this a limitation of GMSAs or is there something else that needs doing for this to work?
Thanks
David Z
↧
Load windows usb driver based on location id, instead of vid/pid
I want to load the "usb driver" on "windows Operating system" based on the location id(where the device is connected), instead of the
Vendor id/Product id. Could you please help ?
↧
EVent ID 1202, ADWS
Dear Forum,
i face one problem when i deploy RODC, while the install it appear one error message below, and when i check on event viewer it show event error id 1202, please kindly check error message and event log in my attach file. thanks everyone!
↧
Service Accounts required permissions
Hi
We have many service accounts which are part of local Administrators group, through GPO we are planning to restrict the membership of Administrators group and to provide these service accounts "Log on as a service" permission through GPO. What we understood is, by providing service accounts these permission, then there is no need to add these accounts to local administrators group.
Your suggestions please
Thanks in advance
LMS
↧
↧
Windows Hello for Business - On Prem Certificates - Client Side Errors
After following the deployment guide here
I'm not getting prompted on the client to enroll, and when trying to enroll the options are grayed out. The client log Microsoft-Windows-HelloForBusiness/Operational errors out with
The device registration prerequisite check failed. (EventID 7200)
The Primary Account Primary Refresh Token prerequisite check failed. (EventID 7200)
Windows Hello for Business prerequisites check failed. Error: 0x8007051F (EventID 7054)
GPO, MFA, Certs and ADFS are set up. Service accounts all nominal, every step of the guide checked 10 times over. The errors don't seem to be documented, and something is missing. Please help!
↧
Delete AD Object Problem
Hi Guys,
I need delete the object SCORREVA1 but when I try search this, only can by Entire Directory option in AD Users and Computers Console:
But when i Try delete this, show the next error:
If I try search with another Option different to "Entire Directory" I can´t found this.
Please help me, and sorry for my English.
Thank´s and best regards.
↧
Old Backup Domain controllers
Hi
Can we use a domain controllers backup on Windows 2008 R2 to restore a domain controllers on Windows 2016?
↧
How to enable sidhistory modify premission?
Hello,
Because of the customer's cyber limitation, It's unable to create the domain trust relationship, we need to migrate users/groups sid from old domain to new domain(<g class="gr_ gr_44 gr-alert gr_spell gr_inline_cards gr_run_anim ContextualSpelling" data-gr-id="44" id="44">sidhistory</g>), is there a way to do this task?
Tsungi
↧
↧
Event log 4625, Status =0xc000006D, 0xc0000064 , what is this log and why getting generate.
Hi Everybody,
I want to monitor account audit on my Domain controller that who, and when, login on machine domain, how may user tried to login on domain, who many failed login attempt happened.
For this, I have did some R&D over internet and enable account audit, log out and login policy from GPO. But there are lots of alerts are getting generate with different account names. i have pasted one event log following, I searched over internet, they said that 0x0000064 error is related to user account not exists.
Now question is that when user account is not exists then why these alert are generating or who is trying to login . i dont understand. You guys have lots of experice and i belive you must know about it. could you please let me know about it.
Thanks for you help.
Account name =NRTQQ , Status =0xc000006D, 0xc0000064, login type =3 administrator = , 6d, 6a An account failed to log on. Subject: Security ID: NULL SID Account Name: - Account Domain: - Logon ID: 0x0 Logon Type: 3 Account For Which Logon Failed: Security ID: NULL SID Account Name: BUSTER Account Domain: Failure Information: Failure Reason: Unknown user name or bad password. Status: 0xC000006D Sub Status: 0xC0000064 Process Information: Caller Process ID: 0x0 Caller Process Name: - Network Information: Workstation Name: - Source Network Address: - Source Port: - Detailed Authentication Information: Logon Process: NtLmSsp Authentication Package: NTLM Transited Services: - Package Name (NTLM only): - Key Length: 0 This event is generated when a logon request fails. It is generated on the computer where access was attempted. The Subject fields indicate the account on the local system which requested the logon. This is most commonly a service such as the Server service, or a local process such as Winlogon.exe or Services.exe. The Logon Type field indicates the kind of logon that was requested. The most common types are 2 (interactive) and 3 (network). The Process Information fields indicate which account and process on the system requested the logon. The Network Information fields indicate where a remote logon request originated. Workstation name is not always available and may be left blank in some cases. The authentication information fields provide detailed information about this specific logon request. - Transited services indicate which intermediate services have participated in this logon request. - Package name indicates which sub-protocol was used among the NTLM protocols. - Key length indicates the length of the generated session key. This will be 0 if no session key was requested.
↧
Can't search user by using dsquery command
Hi
I would like to find base-dn of user.
I use "dsquery user <-name>". I can't find it though
User is in domain and user is in ou that i created also
Do you have any command to search it?
Thank you
↧
GPO : Deployment (MSI Agent)
Hi Guys,
Please find my technical details :
Windows Server 2012 R2 (AD) - i am pushing the agent on windows 10 client trend micro.msi file but the file is not deploying on windows 10 giving the following error : regarding deployment issue for Windows 10 "Error: 8007071a -The remote procedure call was cancelled”.
Please assist on urgent basis.
Regards, Ravi Kumar
↧